Consists of a large opening angle (between 70 - 90 degrees) with the bottom cut angled away from the top and felling cut. The preferred choice when working with trees on slopes when you want the hinge to remain intact for a longer period of time. Pros - The hinge stays intact until the tree is on the ground.Ĭons - Leaves behind reasonably large stumps. Of these, the open-faced directional notch is the easiest. Depending on the lay of the land, you’ll either use an open-faced notch, a conventional notch or a Humboldt notch. Typically, the majority of directional notches are open-faced. What Are the Different Types of Directional Notches? A directional notch and hinge will not only help it fall where you want it to, but also make it much safer too. If you have a tree that is perfectly straight, no leaning or heaviness and you cut right through in one fell swoop, where it lands will be luck of the draw. By removing a small notch out of the trunk and creating a hinge, you prevent the tree from falling in any direction, and instead, force it to land where you want it to. Notches are used to help a tree fall in your chosen direction. Ultimately, the surrounding terrain and any obstacles in the way will determine which type of cut is best. Of course, if this is into a building or road, then it’s not always a viable option. The easiest method is to fell trees in the direction they would naturally fall if blown over by the wind. Depending on its age, fibre density, whether it’s leaning a certain way, height, the way the branches fall and even the weather conditions on the day making the right cut in the right place makes all the difference. Felling a tree requires much more than simply whipping out your chainsaw and getting to work on it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |